Have you ever experienced an instance, wherein your SSD(Solid State Drive) is not detected in BIOS. This is because of its few configuration failures during the installation process. Are you among those users who need to enable SSD in BIOS. Then, we have good news for you. Considering the demanding queries to enable SSD in BIOS, we have come up with this post. In this article, we will focus on the reasons why BIOS fails to recognize SSD along with reliable solutions.
Let’s Follow A Scenario
“While loading BF4 on my system, suddenly my system got crashed. Ever since then, I am unable to use my SSD as a boot drive. After the crash occurred, the BIOS is not detecting my SSD now. As it is not showing up a boot option. So, help me know that how do I enable SSD in BIOS now? Kindly revert back at the earliest.”
“Due to some requirement, I am in the process of changing my old HDD with an SSD. Now, I am only going to use SSD, hence for that, I have bought Win10 CD to use it. Here, I am a little confused that what do I need to change in the BIOS to set up the new SSD. Could someone explain the procedure to enable SSD in BIOS?”
What is a BIOS?
Before enabling SSD in BIOS. Let’s understand what is BIOS all about. It is system software, which is embedded inside the computer. It enables the computer to start up and also helps in setting most of the hardware peripherals. The basic function of the BIOS is to identify, initialize and test the system devices like hard disk, USB, video display card, etc.
It can be accessed when the system is turned on. Moreover, it only requires the push of a function key, like F1, F2 or F10 to access it.
Major Reasons Why BIOS Fails to Detect the Solid State Drive
There can be several reasons, where the BIOS is unable to recognize the SSD. The following are some of the major reasons,
- When the drive is not enabled in the BIOS: After the system is turned on, it will ask to enter the System Setup/System BIOS. Without which, a user cannot enable SSD in BIOS
- Improper installation of SATA Drivers: While installing the older version of Windows, sometimes the drive is not detected. For that, update the driver for the computer storage controller
- Unplugged or defective data cable: Replace the cable if there exist folding, crimping, creasing data cables. This can cause BIOS to not detect the drive, hence fails to enable SSD in BIOS
- Imperfect Solid state drive: Even after properly checking the above causes, if the drive is still not detected. This can due to faulty or corrupted drive, which can be fixed using SysTools SSD Recovery tool.
How Do I Enable SSD in BIOS Manually?
Solution 1: Detect the SSD in the BIOS
In most cases, the SSD is automatically detected by the BIOS. In some cases, it displays the drive model number. Whereas, in other cases, it only indicates the existence of a drive and its capacity.
Solution 2: Enable the SATA Port
Now, to enable SSD in BIOS, the drive needs to be first detected. Once you realize that the drive is not detected, it may because it has been turned off in the System Setup. After adding the drive to the system, make sure to enable the port simply by turning it ON in the System Setup.
To enable the SSD in BIOS, one needs to enable the drive to ON mode, as given in the below screenshot,
Solution 3: Complications in Cables and Connections
In order to enable SSD in BIOS, if a damaged SATA cable or connection can lead the BIOS to not detect the drive. There can be problems with the SATA connections because they are quite fragile and gentle to handle.
Therefore, try to check the cable by re-plugging it into the system and to the drive. If the problem still persists, try to replace it with another cable. This will help to detect the drive, thereby helps to enable SSD in BIOS.
During the process of enabling the SSD in BIOS, is your valuable data got accidentally deleted from the SSD. Then, try to recover the files back using some reliable professional tool.
Use SysTools SSD Recovery Software to Recover the Lost Data
There can be an instance, wherein a user corrupts or formats the drive while enabling SSD in BIOS. Therefore, to resolve all these issues, one can use SSD Recovery Software. It is a smart and trustworthy tool, which is capable to recover the deleted files from a solid state drive. If the above-discussed solutions are not properly followed, then it can lead to serious issues like corrupting the drive. This situation can be overcome by using this highly equipped tool, which can recover the corrupt SSD within a few simple clicks. Apart from that, it also helps to recover the files from the formatted SSD.
Sometimes users fail to enable SSD in BIOS. This situation occurs when the BIOS does not recognize the SSD. This blog has mentioned the top solutions to enable the SSD in BIOS. If in case, the SSD gets corrupted due to technical dubieties or following the incorrect steps. The corrupted SSD can be recovered by using SSD Recovery Software, which is the most trusted software by the users to recover the corrupted files from the SSD.